Product Details:
Model Name/Number | MPI-530 |
Display Type | Digital |
Phase | Single Phase |
Sound Level | Less than 65 dB |
Operating Frequency | 45 to 65 Hz |
Brand | Sonel |
Protection class | IP54 |
Power supply | Ni-MH rechargeable or LR14 alkaline disposable batteries |
Product Details:
Model Name/Number | CMP-2000 |
Brand | Sonel |
Operating Temperature | 0 to 50 Degree C |
Display Type | 6600 counts, backlit LCD |
Weight | 570 g |
Protection class | IP20 |
Power supply | 9 V battery type 6LR61 |
Dimensions | 281 x 108 x 53 mm |
Product Details:
Brand | Sonel |
Model Name/Number | PQM-711 |
Display Type | Digital |
Phase | Single Phase |
Frequency | 50-60 Hz |
Dimensions | 200 x 180 x 77 mm |
RMS Voltage Range with PT Multiplier | 1000 kV |
RMS Current Range with CT Multiplier | 100 KA |
Rechargeable Li-Ion battery backup time | 2 Hrs |
PQM-711 power quality analyzer is an advanced product for wide type of measurements, analysis and recording of network parameters 50/60 Hz and the power quality diagnostic according to European standard EN 50160. PQM-711 is an innovative model with a wireless communication Wi-Fi , which allows for automatic pairing with the included tablet, with a large 10" touch screen. Tablet allows full operating of the analyzer, live data preview and the reading and analysis of data stored in the internal memory. With this solution, the PQM-711 is an unique device that combines the advantages of the analyzer with built-in display and typical portable analyzers (known as Black Boxes).With the tablet you can very fast checked the device under test. On the other hand, you can leave the analyzer module for multi-measurements as a typical logger without display. You can very fast diagnose the machine under test using the tablet. On the other hand, you can leave the analyzer module itself for many days measurement as a typical logger without display. PQM-711 has a transient registration with a maximum sampling rate of 10 MHz (rapid changes in voltage) and control signals. The minimum duration of the registered transient is 650 ns.
Analyzer is addressed to a wide range of users who need to control the power quality with a mobile device, it meets the IEC 61000 standards for the Class A. Compliance with the standard includes measurement uncertainty, measurement methods and time synchronization with a reference signal. In case of using analyzer indoor with poor GPS signal additional antenna with 10 meters cable can be used. After placing antenna outside the GPS signal will be easily traced and used for internal clock synchronization.
In practice, the analyzer may be used with all network types with rated voltage from 110 V to 1000 V, directly or indirectly via transducers. It works in the following networks:
Product Details:
Model Name/Number | LXP-10A |
Brand | Sonel |
Display | 33/4 digit LCD with high speed 40 segment bargraph |
Meter dimensions | 170 x 80 x 40 mm |
Power Supply | battery 9 V or rechargeable battery 8,4 V |
Operating humidity | 0% to 80% RH |
Weight | 390 g |
Operating Temperature | 0 Degree to 50 Degree C |
Storage temperature | -20 to 70 Deg C |
Sampling rate | 1.3 Hz |
Country of Origin | Made in India |
The new LXP digital light meter family allows for a very precise measurement of illuminance. Thanks to very high resolution the LXP-10(resolution 0.001 lx ) allows for escape route emergency light measurement. The light meter has a built-in memory for measurement result storing, and additional function making work much easier.
Product Details:
Brand | Sonel |
Model Name/Number | UV-260 |
Battery run time | 2 hours |
Image format | JPG |
Operating temperature | -10 to 50 Deg C |
Weight | 2.5 kg |
Video output | CVBS |
Power consumption | 10 W |
Storage temperature | -25 to 60 Deg C |
Size | 238 x 165 x 91 mm |
Storage media | SD card |
Country of Origin | Made in India |
Being with high sensitivity UV-260 is a power tool to detect UV emission in full daylight with high signals from faraway and nearby sources. UV-260 is an ideal predictive maintenance device for overhead transmission lines and high voltage substations.
UV-260 is newest genaration of UV imaging system with an emphasis on high performance functionality and easy operation, it is widely used in transmission line inspection, electrical utilities, HV research institutes, HV electrical component inspection, HV panal inspection, service providers, laboratories and more.
Product Details:
Model Name/Number | MMR-650 |
Brand | Sonel |
Dimensions | 318 x 257 x 152 mm |
Operating temperature | -10 to +50 Deg C |
Humidity | 20-90% |
Interface Standard | USB, LAN, Wi-Fi |
Protection against external voltage | Up to 600 V AC for 10 s |
TFT graphic display | 800 x 480 pixels |
Weight | 3.5 Kg |
Battery charging time | 3.5 hours |
Country of Origin | Made in India |